Laboratory Incubators

This Lab B.O.D Incubators, GMP Model is made under GMP guidelines & as per GMP Rules used for all pharmaceutical Co & Microbiology Dept Etc.



Technical Specifications:

• Double walled construction outer S.S304 dull Finish Inner S.S316 Mirror polished
• PUF insulation between two walled
• Full acrylic door permit inspection of specimen’s with out disturbing the temp
• Temp Controlled by PID Controller with auto tuning facility with accuracy of ±0.5 C .temp Range 5 C to 60 C accuracy ±0.5 C
• Illumination light are provided for viewing
• CFC free hermetically sealed compressor provide temp for below ambient condition
• Air circulation fan for marinating temp uniformity through out the chamber
• The chamber is provided with modular removable shelves made of S. S. for complete flexibility in use.
• To work on 230 volts 50 H2
  
  

Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller

Safety Care : Built in temp deviation audio visual alarm. Safety thermostat for over shoot temp. Cut off system HRC fuses for compressor heater & main, time delay circuit for safety of compressor.


This B.O.D. Is Available in Below Sizes:

This Bacteriological Incubator are made as per guideline of GMP supplied with IQ OQ & PQ document with calibration report for PID controller.


Technical Specifications:

• Triple walled construction
• Inner made of S.S.316 mirror polished
• Outer made of S.S.304 Dull finish
• Gap between the two walled filled with glass wool insulation of 65 mm
• Heating Element is made of S. S. ‘U’ type tubular nichrome wire with S.S. Sheathing
• Heaters are placed at the right & left side of the inner chamber
• PID Controller with auto tuning facility with double display to view set & current temp
• Temp. Range 5 C above ambient to 60 C with accuracy of ± 0.5 C.
• Silicon rubber gasket fitted on door to prevent lost of heat
• Control Switch & pilot lamp are fitted on front panel supplied with S.S. Rod Type Jali
  
  

Bacteriological Incubator GMP Model Is Available in Below Sizes:



Optional Accessories:

• Digital Timer to cut off the heater at set interval
• PID Controller with Printer interface to record
• Set Valves & actual valves data & Time
• 80 Column DOT MATRIX Printers
• Safety controller with alarm for Temp. Overshoot
• Single 4 point/8 point data logger

Our extensive range of B.O.D. Incubators has been designed especially for biological Oxygen demand determination & other applications like general incubators, Serum studies & Enzyme assays test. We can also customize the B.O.D. Incubators to suit the varied requirement of the clients with in stipulated time frame.


Technical Specifications:

• Double walled cabinet mounted on castor wheels
• Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated
• Full Length inner acrylic door permit inspection of specimens with out disturbing the Temp
• Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch
• CFC Free hermetically sealed compressor provide temp. For below ambient condition
• Air circulation fan for maintain Temp. Uniformity through out the chamber
• Flush fitting insulated double walled door
• The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use
• To work on 230 volts 50 H2

 

Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller.

Safety Features : Built in Temp Deviation Audio visual alarm, Safety thermostat for overshoot Temp. Cut off system. HRC Fuses for compressor heater & mains Time daily circuit for safety of compressor.

Special Care : A suitable K V. A. Servo stabilizer is strongly recommended.

This B.O.D.incubator Is Available in Below Sizes:

Our range of Laboratory Bacteriological Incubators are available in different size from 35 Liters to 1000 Liters. These laboratory bacteriological incubators are based on latest Technology & are available in compact sizes. We used High grade M.S. Sheet & S. S. sheet for the manufacturing Process Ensuring Optimum Efficiency & Performance Level.


Technical Specifications:

• Incubators are Sturdy Double walled Unit
• Inner chamber made of S.S.304 & outer chamber made of M. S. powder coated
• Gap between the two walled filled with glass wool insulation to avoid heat loses
• Heating element is made of high grade chrome plate nichrome wire
• Temp is controlled by thermostat
• Temp. Range 5 C above ambient 60 C accuracy ± 2 C
• Air Ventilation is provided on the top of the unit to remove the hot gases/Fumes
• In lab type incubator heaters are placed in the bottom side of the Unit
• All the control switches & Pilot lamps are fitted on the front panel
• Tray should be supplied with G.I. ware Mesh
  
  

Optional Accessories:

• Digital Temp. Controller cum indicator in Live of thermostat with Accuracy ± 0.5C
• Air circulation Fan for Uniform Temp
• Digital Timer
• S. S. Wire mesh jail

Our company has specialized in the sphere of fabricating a wide range of Memmert Incubators that is sturdy in construction & durable. We used high grade raw materials that is procured from the renowned vendors of the country for the mgf. process for ensuring high efficiency of the memmert incubators. Available in different sizes, we can also customize these incubator as per the requirement of Clients.


Technical Specifications:

• Triple walled Unit
• Inner chamber made of S.S.304
• Outer chamber of Mild Steel with Powder coating
• Gap Between the two walls filled with glass wool insulation to avoid heat loses of 65 mm
• Heating element Are Made of high grade chrome plated nichrome wire
• Heaters are placed ate the right & left side of the inner chamber
• Enable with thermostat control the Temperature Temp. Range 5 C above ambient to 60 C accuracy ±2 C
• Air Ventilation is placed on top of both sides to remove heat gases  and fumes
• Control Switch & pilot lamps are fitted on front panel
• Supplied with G.I. Wire mesh Jali
  
  

Memmert Incubator is Available in Below Sizes:

Optional Accessories:

• Digital Temp. Controller cum indicator in Live of thermostat with Accuracy ± 0.5 C
• Air circulation Fan for Uniform Temp
• S. S. Rod Type Jali
• Digital Timer

Our company also takes pride in providing a wide range of Orbital Shaking Incubator. These are designed & fabricated to suit various is standard of orbital shaking motion applicable in growing field of medical agricultural industrial Research Laboratories & Others.



Technical Specifications:

• Double walled inner chamber made of S.S.304 & outer M. S. Powder coated
• PUF insulation between two walled
• Heavy angle frame structure from all sides
• Shaking assembly electric pulley mechanism
• Platform adjustable stainless steel platform
• Flask Holder: Spring type clamp arrangement with easy interchangeability facility
• Motor (PMDC Motor)
• RPM 50 to 250 RPM controlled by Regulator
• Stroke 25 to 30 mm Stroke displacement
• Temp. Controlled by digital Temp. Controller cum indicator with accuracy of ±0.5 C
• Temp. Range 10 C to 60 C in cooling Model & in heating Model 5 C above ambient to 60 C.
• Cooling by CFC free hermetically sealed compressor
• Heating by ‘U’ Type tubular S. S. Heater
• Illumination light to view
  
  

Optional Accessories:

• RPM Indicator in digital Display
• Digital timer with Audio visual Alarm
• Chamber illumination with U. V. Tube
• Additional tray as per Flask Size
  
  

Orbital Incubator Is Available in Below Sizes:

We deal in Tray Dryer.


Applications : Tray dryers are ideally suitable for drying chilies, spices, papads, potato chips, onions, fish, garlic, grapes, cashew nuts, confectionery, macaroni, wood etc. It is  also for used for drying pharmaceuticals, chemicals, powders, granules, plastic granules etc. Heating is either by electric or steam or both combined. Various models are listed in this leaflet to suit customer requirements. Custom-built models can be quoted on request.

Construction : The external frame work is made of thick gauge m. S plates both the exterior made of thick gauge crca sheets or aisi 304 sheets. In between the space, resin bonded special quality fiber glass heat insulation slabs are provided. Safety guards for fan blade & heaters are provided. The interiors is painted with heat resistant aluminum paint. The exterior is spray painted with silver gray gloss paint, inner chamber - crca or aisi 304, outer chamber - crca or aisi 304.

Fan & Motor : According to models doors are provided with smooth moving hinges, latch catch & sealing gaskets. Well balanced large propeller type fan (s) fitted inside the chamber with suitable shaft & dual bearing with electric motor (s) drive.

Heaters : 'U' type tubular heaters are provided inside the chamber for maximum heat transfer. Steam heated models are fitted with finned type steam radiators.

Controls Panel : Control panel box consists of contactor assembly, on & off switch, digital controller  neon lamps, operating push buttons are incorporated in the control box.

Damper : Adjustable exhaust damper with an arrangement for pre-filtration, in the air inlet.

Optional : Gmp models/complete s. S unit. Trolleys & trays supplied as per requirement. Microprocessor based temp. Control with printer interface (centronic pc interface with rs 232 cpc/rs-485 for networking of controllers. Profile controller for ramp/soak cyclic applications.

Safety Features : Built-in temp. Deviation audio visual alarm. Safety thermostat for over shoot temp. Cut off circuit to cut off the whole systems in case of malfunction. (only applicable to microprocessor based models).  

Validation : Iq oq pq & dq protocols with complete documentation & certification traceable to national & international standards.

Steam Heated Models : These are provided with finned tubular steam coils instead of/in addition to heaters, along with solenoid valve.